RESEARCH GROUP COMPUTED TOMOGRAPHY

UNIVERSITY OF APPLIED SCIENCES UPPER AUSTRIA - RESEARCH & DEVELOPMENT LTD.

Publications 2014

[1] B. Plank, S. Senck, C. Fürst, J. Kastner - Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[2] S. Senck, D. Salaberger, M. Kastner, A. Fuchsbauer, J. Kastner - Microbial Electrolysis Cells: threedimensional characterization of bacterial biofilm by means of high-resolution X-ray computed tomography and contrast agents - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[3] S. Senck, M. Coquerelle, G. Weber, S. Hofstaetter, J. Kastner - ESTIMATION OF MICROSTRUCTURAL PARAMETERS IN THE PROXIMAL TIBIA BY MEANS OF SHAPE REGRESSION: COMBINING HIGH RESOLUTION X-RAY COMPUTED TOMOGRAPHY AND GEOMETRIC MORPHOMETRICS - WCO-IOF-ESCEO-SEVILLE 2014, Sevilla, Spain, 2014

[4] J. Weissenböck, A. Amirkhanov, W. Li, A. Reh, A. Amirkhanov, E. Gröller, J. Kastner, C. Heinzl - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers, Yokohama, Japan, 2014

[5] D. Kiefel, R. Stössel, J. Weissenböck, C. Heinzl, J. Kastner - CFRP porosity characterization using μ- Computed Tomography with optimized test parameters - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[6] S. Senck, C. Gusenbauer, M. Frelat, G. McGlynn, G. Weber, J. Kastner - Covariation between shape and bone microstructure in the proximal tibia in humans - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[7] M. Reiter, D. Weiß, C. Gusenbauer, S. Kasperl, C. Kuhn, M. Erler, J. Kastner - Evaluation of a histogram based image quality measure for X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[8] V. Revol, B. Plank, C. Kottler, J. Kastner, R. Kaufmann, A. Dommann, A. Neels - Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 45-51

[9] B. Plank, S. Senck, C. Fürst, H. Scharleitner, J. Kastner - Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 55-62

[10] A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[11] M. Jerabek, M. Reiter, D. Salaberger, Z. Major - Prediction of fiber orientation in short glass fiber polypropylene composites and the consequences for micromechanical simulations - Proceedings of ECCM 16 European Conference on Composite Materials, Sevilla, Spain, 2014, pp. 1

[12] D. Salaberger, M. Arikan, T. Paier, J. Kastner - Characterization of damage mechanisms in glass fiber reinforced polymers using X-ray computed tomography - Proceedings of ECCM 16 European Conference on Composite Materials, Sevilla, Spain, 2014, pp. 8

[13] J. Kastner, D. Salaberger, C. Heinzl, J. Weissenböck, M. Arikan - Quantitative measurment and visualisation of fibre orientation and fibre length distribution of fibre reinforced polymers - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[14] S. Oberpeilsteiner, T. Reiter, D. Salaberger - Modelling of short fiber reinforced materials for evaluation of effective material data - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 5

[15] S. Oberpeilsteiner, T. Reiter, D. Salaberger - Coupling of in-situ-CT with Virtual Testing by FEM of Short Fiber Reinforced Materials - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 7

[16] M. Aigner, D. Salaberger, T. Köpplmayr, B. Heise, S. E. Schausberger, A. Buchsbaum, D. Stifter, J. Miethlinger - CHARACTERIZATION OF DAMAGE MECHANISMS IN GLASS FIBRE REINFORCED POLYMERS USING X-RAY COMPUTED TOMOGRAPHY, Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[17] C. Kuhn, M. Reiter, S. Schröpfer, S. Kasperl, D. Weiss, M. Erler, CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part, Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[18] C. Gusenbauer, M. Reiter, J. Kastner, G. Kloesch, Detection of Non-Metallic Inclusions in Steel by X-ray Computed Tomography and After Fatigue Testing, Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[19] D. Salaberger, J. Kastner, M. Arikan, T. Paier - Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography - Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[20] S. Großeiber, C. Gusenbauer, S. Ilie, E. Kozeschnik, G. Requena - Damage Initiation During Hot Deformation of a Continuously Cast Steel - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[21] T. Gross, C. Gusenbauer, A. Synek, D. Pahr - CT Image Acquisition for Implant Modeling in Bone Biomechanics - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[22] M. Schöbel, T. Cavadini, G. Baumgartner, J. Jonke, G. Requena, C. Gusenbauer - Multiscale Tomography as a Tool for Stress Measurement and Damage Characterization in a Cylinder Head Component - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[23] C. Chimani, R. Kretz, C. Angermeier, C. Gusenbauer - Investigations on Microstructure Effect of Changing Fluid Flow Characteristic in High Pressure Die Casting - Materials Science Forum, Vol. 782, 2014, pp. 8-15

[24] A. Lukeneder, S. Lukeneder, C. Gusenbauer - Computed tomography and laser scanning of fossil cephalopods (Triassic and Cretaceous) - Denisia, Vol. 32, 2014, pp. 81-92

[25] S. Großeiber, C. Gusenbauer, S. Ilie, G. Requena, E. Kozeschnik - Relevance of hot ductility tests to crack sensitivity during continuous casting of steel - Advanced Materials Research, Vol. 922, 2014, pp. 201-206

[26] S. Zaunschirm, High-resolution X-ray computed tomography studies of compressed magnesium samples, Master-Thesis, Austria

[27] A. Amirkhanov, B. Fröhler, J. Kastner, E. Gröller, C. Heinzl - InSpectr: Multi-Modal Exploration, Visualization, and Analysis of Spectral Data - Computer Graphics Forum, Vol. 33, pp. 91-100, 2014.

[28] F. Nachtrab, M. Firsching, N. Uhlmann, C. Speier, P. Takman, T. Tuohimaa, C. Heinzl, J. Kastner, DH. Larsson, A. Holmberg, G. Berti, M. Krumm, C. Sauerwein, NanoXCT: development of a laboratory nano-CT system, SPIE Optical Engineering+Applications, 92120L-92120L-8, 2014

[29] M. Sedlmair, C. Heinzl, S. Bruckner, H. Piringer, T. Moller, Visual Parameter Space Analysis: A Conceptual Framework, IEEE Transactions on Visualization and Computer Graphics (to appear), vol. 20, no. 12, 2014.

[30] K. Niel, C. Heinzl, Trends and developments in industrial machine vision: 2013, IS&T/SPIE Electronic Imaging, 902405-902405-6, 2013

[31] A. Amirkhanov, S. Bruckner, C. Heinzl, E. Gröller, The Haunted Swamps of Heuristics: Uncertainty in Problem Solving, Scientific Visualization, Springer London, 51-60

[32] C. Heinzl, S. Bruckner, E. Gröller, Guest editorial—Uncertainty and parameter space analysis in visualization, Computers & Graphics 41 (Complete), A1-A2

[33] J. Weissenböck, A. Reh, D. Salaberger, C. Heinzl, J. Kastner, Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers, 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic

[34] C. Heinzl, J. Weissenböck, A. Reh, J. Kastner, T. Dierig, T. Günther, D. Kiefel, R. Stössel, Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced polymers, 6th Symposium for NDT in Aerospace, 12-14 November 2014, Madrid, SPAIN

Publications 2013

[1] J. Kastner, B. Plank, D. Salaberger, High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals, Proceeding ASNT 22nd Annual Research Symposium, 18.-21. March 2013, Memphis, United States of America

[2] J. Charwat-Pessler, M. Musso, K. Entacher, B. Plank, P. Schuller-Götzburg, S. Tangl, A. Petutschnigg - Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy - Journal of Applied Mathematics, 2013, pp. 8 (Accepted)

[3] B. Plank, F. Ellert, J. Gruber, C. Gusenbauer, J. Kastner - Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography and Xray computed tomography. - DGZfP Annual Conference 2013, Dresden, Germany, 2013, pp. 9 (Accepted)

[4] V. Revol, B. Plank, R. Kaufmann, J. Kastner, C. Kottler, A. Neels - Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer - NDT & E INTERNATIONAL, Vol. 58, pp. 64-71, 2013

[5] B. Plank, C. Gusenbauer, D. Salaberger, J. Kastner - Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business - Proceedings FFH 2013, Dornbirn, Austria, 2013, pp. 480-483

[6] T. Köpplmayr, I. Milosavljevic, M. Aigner, R. Hasslacher, B. Plank, D. Salaberger, J. Miethlinger - Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled polypropylene - POLYMER TESTING, Vol. 31, No. 3, 2013, pp. 535-544

[7] W. Stefanie, T. Gruenewald, S. Ostrowski, B. Plank, G. Standfest, B. Mies, A. Petutschnigg - Assessment of mechanical properties of wood-leather panels and the differences in the panel structure by means of X-ray computed tomography - BioResources, Vol. 8, No. 1, 2013, pp. 818-832

[8] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl. Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers. 1st International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, 2013, pp. 4

[9] A. Amirkhanov, C. Heinzl, C. Kuhn, J. Kastner, E. Gröller, Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data, SCCG 2013: Spring Conference on Computer Graphics, Smolenice castle, Slovakia, 2013

[10] A. Reh, C. Gusenbauer, J. Kastner, E. Gröller, C. Heinzl - MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 19, No. 12, 2013, pp. 2906-2915

[11] C. Heinzl, J. Kastner - Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced Xray Technique - Proceedings 3rd EASN Workshop on Aerostructures, Milan, Italy, 2013, pp. 5

[12] D. Salaberger, S. Gleiß, J. Kastner - Comparison of methods to determine fibre length distribution: X-ray CT versus standard method - Int. Conf. Structural Analysis of Advanced Materials, Kos, Greece, 2013

[13] M. Aigner, D. Salaberger - The influence of glass fibres on the longational viscosity studied by means of optical coherence tomography and X-ray computed tomography - PPS 29 Proceedings, Nürnberg (Deutschland) / Nuremberg (Germany), Germany, 2013

[14] D. Salaberger, S. Oberpeilsteiner, M. Palmstingl, T. Koch, J. Kastner: Modellierung von Schädigungsmechanismen von kurz faserverstärkten Polymeren mit Hilfe von Computertomografie – DGM Werkstoffprüfung Proceedings, Neu-Ulm, Deutschland, November 2013 (Accepted)

[15] D. Salaberger, W. Li, J. Kastner - Characterization of bent cellulose fibres using Micro-CT analysis, 1st International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, 2013

[16] C. Gusenbauer, J. Kastner, B. Plank, S. Baumgartner, B. Harrer, G. Requena, G. Garcés - Microstructure characterization of thermomechanically treated Al- and Mg-alloys by high resolution X-ray computed tomography - Euromat, Sevilla, Spain, 2013

Publications 2012

[1] J. Kastner, B. Harrer, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[2] J. Kastner, D. Salaberger, B. Plank, High resolution X-ray computed tomography of fibre and particle filled polymers, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[3] J. Kastner, B. Plank, C. Kottler, V. Revol, Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[4] D. Salaberger, T. Koch, Y. Voronko, S. Seidler, J. Kastner, Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers, Proceedings POLYCHAR 2012, World Forum on Advanced Materials, 26-30. March 2012 Dubrovnik, Croatia

[5] J. Kastner, B. Plank, G. Requena, Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography, Materials characterization 64, 79-87 (2012)

[6] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl, Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM 31, No. 3, 1185-1194 (2012)

[7] C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer, Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL 99, 1-25 (2012)

[8] J. Kastner, B. Plank, D. Salaberger, K. Kannappan, Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. Proceeding FFH 2012, April 2012, Graz

[9] J. Kastner, B. Plank, C. Gusenbauer, B., G. Requena, 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie, Proceedings 7. Ranshofener Leichtmetalltage, 7.+8. Nov. 2012, Gmunden

[10] M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Heinzl, C. Gusenbauer, J. Kastner, Evaluation of transmission based image quality optimisation for X-ray computed tomography, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[11] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller, Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[12] J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg, 3D Analysis of heterogenous and biogenic structures based on bone augmentation material, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[13] M. Jerabek, M. Reiter, H. Herbst; B. Plank, D. Salaberger, Z. Major, Characterization of Short Fiber Reinforced Polypropylene Composites, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[14] M. Tóth, G. Moser, C. Gusenbauer, Analysis of the middle ear mechanics with micro-CT, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[15] S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie, Correlation between hot ductility and damage in microalloyed steel slabs, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[16] B. Plank - Vom Granulat zum Spritzgussbauteil: Einfluss der Spritzgussprozesskette auf die Faserlängenverteilung bestimmt durch Röntgen- Computer-Tomografie. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Österreich, 2012, pp. 150

[17] G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol. 46, No. 4, 2012, pp. 19

[18] T. Koch, D. Salaberger, Methods for Characterizing the 3-D Morphology of Polymer Composites, MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124

[19] D. Salaberger, H. Scharleitner, J. Kastner, 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe von Röntgen-Mikro Computertomografie, DACH-Jahrestagung 2012, 17.-19. September 2012, Graz/Austria

[20] H. Qureshi, M. Malik, M.A. Ahmad, C. Heinzl, Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data, 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, WSCG 2012, June 25-28, 2012, Pilsen, Czech Republic, pp. 8

[21] J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium on NDT in Aerospace, Augsburg, Germany, 2012

[22] J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle reinforced plastics - DACH NDT Annual Meeting 2012, Graz, Austria, 2012

[23] B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research - OPTICAL FIBER TECHNOLOGY, Vol. 18, No. 5, 2012, pp. 403-410

[23] G. Standfest, M. Dunky, S. Kranzer, B. Plank, D. Salaberger, A. Petutschnigg - 3D pore size characterisation by means of image analysis and mathematical morphology - JOURNAL "HOLZTECHNOLOGIE", Vol. 53, No. 5, 2012, pp. 39-45

You are here: Home Research Publications