Publications http://www.industrielle-ct.at/cms2/index.php/en/sitemap/58-research/publications Thu, 25 Aug 2016 03:07:22 +0200 Joomla! - Open Source Content Management en-gb Publications http://www.industrielle-ct.at/cms2/index.php/en/research/publications/100-publications http://www.industrielle-ct.at/cms2/index.php/en/research/publications/100-publications

Publications

Below find a complete list of all the CT-group's publications: 

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 18 Jan 2013 09:13:38 +0100
Publications 2016 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/200-publications-2016 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/200-publications-2016

Publications 2016

[1] J. Weissenböck, A. Bhattacharya, B. Plank, C. Heinzl, J. Kastner, Visual Classification of Braided and Woven Fiber Bundles in X-Ray Computed Tomography scanned Carbon Fiber Reinforced Polymer Specimens, Case Studies in Nondestructive Testing and Evaluation, May 2016

[2] C. Gusenbauer, E. Leiss-Holzinger, S. Senck, K. Mathmann, J. Kastner, S. Hunger, W. Birkfellner - Characterization of medical and biological samples with a Talbot-Lau grating interferometer µXCT in comparison to reference methods - Case Studies in Nondestructive Testing and Evaluation, 2016, doi: 10.1016/j.csndt.2016.02.001

[3] I. Straumit, C. Hahn, E. Winterstein, B. Plank, S. Lomov, M. Wevers - Computation of permeability of a non-crimp carbon textile reinforcement based on X-ray computed tomography images - COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 81, No. 1, 2016, pp. 289-295

[4] C. Gusenbauer, M. Reiter, D. Salaberger, J. Kastner - Comparison of Metal Artefact Reduction Algorithms from Medicine Applied to Industrial XCT Applications - Proceedings of 19th World Conference on Non-Destructive Testing, Munich, Germany, 2016

[5] M. Reiter, J. Kastner - Investigation towards simulation-based determination of measurement uncertainties for X-ray computed tomography - Proceedings of 4th International Conference on Image Formation in X-Ray Computed Tomography, Bamberg, Germany, 2016

[6] C. Gusenbauer, S. Hunger, S. Senck, J. Kastner - Characterization of Tooth Samples with a Talbot-Lau Grating Interferometer μXCT Desktop Device - Proceedings of 4th International Conference on Image Formation in X-Ray Computed Tomography, Bamberg, Germany, 2016

[7] M. Reiter, M. Erler, C. Kuhn, C. Gusenbauer, J. Kastner, SimCT: a simulation tool for X-ray imaging, 6th Conference on Industrial Computed Tomography (iCT2016), Wels, Austria, 2016

[8] B. Fröhler, T. Möller, C. Heinzl - GEMSe: Visualization-Guided Exploration of Multi-channel Segmentation Algorithms - Computer Graphics Forum (Proceedings Eurographics Conference on Visualization), Vol. 35, No. 3, Groningen, Netherlands, June 2016

[9] G. Rao, B. Plank, J. Kastner, Comparision of different segmentation methods for porosity evaluation in CFRP-reference samples and comparison with real porosity samples, 6th Conference on Industrial Computed Tomography (iCT2016), Wels, Austria, 2016

[10] J. Kastner (editor) Proceedings of 6th Conference on Industrial Computed Tomography (iCT2016) 2016, 9-12 February 2016, Wels, Austria, www.ndt.net (2016).

[11] J. Kastner, B. Plank, G. Rao, Evaluation of a Testpiece for Porosity in Carbon Fibre Reinforced Polymers, Proceeding 19th World Conference on Non-Destructive Testing (WCNDT2016), 13 - 17 June 2016, Munich, Germany, 2016

[12] B. Plank, R. Helmus, M. Gschwandtner, R. Hinterhölzl, J. Kastner, In-Situ Observation of Bubble Formation in Neat Resin during the Curing Process by Means of X-Ray Computed Tomography, Proceeding 19th World Conference on Non-Destructive Testing (WCNDT2016), 13 - 17 June 2016, Munich, Germany, 2016

[13] S. Senck, D. Salaberger, C. Gusenbauer, B. Plank, B. Plank, G. Rao and J. Kastner, Talbot-Lau grating interferometer XCT for the quantitative characterization of damage in polymers after impact and static tensile testing, Proceeding 19th World Conference on Non-Destructive Testing (WCNDT2016), 13 - 17 June 2016, Munich, Germany, 2016

[14] C. Gusenbauer, M. Reiter, D. Salaberger, and J. Kastner, Comparison of Metal Artefact Reduction Algorithms from Medicine Applied to Industrial XCT Applications, Proceeding 19th World Conference on Non-Destructive Testing (WCNDT2016), 13 - 17 June 2016, Munich, Germany, 2016

[15] G. Rao, B. Plank, C. Heinzl and J. Kastner, Quantitative evaluation of induced porosity reference samples implemented by drill hole in CFRP using XCT and various segmentation parameters, Proceedings 7th European Conference on Composite Materials (ECCM17), 26th - 30th June, 2016, Munich, Germany, 2016

[16] J. Kastner, S. Senck, B. Plank, D. Salaberger, G. Rao, and C. Gusenbauer, Three-dimensional characterization of structure and damage of polymers using Talbot-Lau grating interferometer µ-XCT, Proceedings 7th European Conference on Composite Materials (ECCM17), 26th - 30th June, 2016, Munich, Germany, 2016

]]>
m.reiter@fh-wels.at (Super User) Publications Wed, 06 Nov 2013 21:38:42 +0100
Publications 2015 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/192-publications-2015 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/192-publications-2015

Publications 2015

[1] S. Senck, F.L. Bookstein, S. Benazzi, J. Kastner, G.W. Weber, Virtual Reconstruction of Modern and Fossil Hominoid Crania: Consequences of Reference Sample Choice, The Anatomical Record, 2015

[2] J. Kastner, B. Plank, D. Salaberger, Application of CT for the characterization of light-weight materials and components, Proceedings 7. Landshuter Lightweight-Confernce, Landshut, Germany, 2015

[3] B. Plank, C. Hannesschläger, V. Revol, J. Kastner - Characterisation of anisotropic fibre orientation in composites by means of X-ray grating interferometry computed tomography - MATERIALS SCIENCE FORUM, Vol. 826, No. 1, 2015, pp. 868-875

[4] C. Gusenbauer, S. Großeiber, B. Harrer, B. Plank, G. Klösch, W. Schützenhöfer, S. Ilie, G. Requena, J. Kastner, Einsatzmöglichkeiten von CT in der Stahlforschung, Proceedings DACH-Tagung, Salzburg, Austria, 11.-13. Mai 2015

[5] J. Kastner, B. Plank, C. Hannesschläger, V. Revol, Talbot-Lau Gitter-Interferometer-Computertomografie für die Charakterisierung von faserverstärkten Kunststoffen, Proceedings DACH-Tagung, Salzburg, Austria, 11.-13. Mai 2015

[6] S. Senck, A. Jäger, M. Aigner, J. M. Grabmair, J. Kastner, Visualization of microbial biofilm in contaminated polymer tubes by X-ray micro-computed tomography and radiocontrast agents, Bio-Film conference 2015

[7] K. Mathmann, C. Heinzl, J. Kastner, Multimodal image analysis for the characterization of complex wheat-dough microstructures, Proceedings 12th International Congress on Engineering and Food (ICEF12), Québec, Canada, June 14-18, 2015

[8] C. Affenzeller, C. Gusenbauer, M. Reiter, J. Kastner, Measurement uncertainty evaluation of an X-ray computed tomography system, Proceedings International Symposium on Digital Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, June 22-25, 2015

[9] J. Kastner, B. Plank, C. Gusenbauer, S. Senck, V. Revol, A. Sasov - Talbot-Lau grating interferometer X-ray computed tomography for the characterization of fibre-reinforced polymers - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015, pp. 10

[10] A. Bhattacharya, C. Heinzl, A. Amirkhanov, J. Kastner and R. Wenger, MetaTracts - A Method for Robust Extraction and Visualization of Carbon Fiber Bundles in Fiber Reinforced Composites, Proceedings 8th IEEE Pacific Visualization Symposium (PacificVis 2015), April 14.-17, 2015, Hangzhou, China.

[11] D. Salaberger, J. Kastner, M. Jerabek, P. Hine und T. Koch, Genauigkeitsbetrachtung quantitativer Röntgen-CT Analysen an kurzfaserverstärkten Polymeren, Proceedings of 20th Symposium on Composites - 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Vienna, 1.-3. Juli 2015

[12] D. Salaberger, P.J. Hine, M. Jerabek and J. Kastner, Assessment of accuracy of fibre orientation measurement using X-ray Computed Tomography, Proceedings ICCM 2015 - International Conference on Composite Materials, Copenhagen, 19-24 July 2015

[13] B. Plank, G. Rao, J. Kastner - Evaluation of CFRP-Reference Samples for Porosity made by Drilling and Comparison with Industrial Porosity Samples by Means of Quantitative X-ray Computed Tomography - Proceedings 7th International Symposium for NDT in Aerospace, Bremen, Germany, 2015, pp. 10

[14] J. Kastner, S. Senck, C. Gusenbauer, B. Plank, C. Hannesschläger, H. Zauner, C. Heinzl, A. Sasov - Three-dimensional characterization of fibre-reinforced polymers using a Talbot-Lau grating interferometer - CT und data fusion methods - XNPIG 2015 3rd Meeting of X-Ray and Neutron Phase Imaging with Gratings, Bethesda, United States of America, 2015

[15] C. Gusenbauer, M. Reiter, J. Kastner, G. Klösch - Detection of Non-Metallic Inclusions in Quenched and Tempered Steel Bars by XCT and after Fatigue Life Testing - steel research international, Volume 87, Issue 3, pp. 386–393 (March 2016)

[16] J. Kastner, B. Plank, C. Heinzl - Advanced X-ray computed tomography methods: High resolution CT, phase contrast CT, quantitative CT and 4DCT - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015, pp. 13

[17] C. Heinzl, J. Kastner, M. Firsching, F. Nachtrab, N. Uhlmann, P. Takman, A. Holmberg, M. Krumm, C. Sauerwein, D. Lichau, P. Doux - Laboratory X-ray tomography for non-destructive testing of specimens and materials at the nanoscale - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015

[18] H. Zauner, J. Kastner, C. Heinzl - Multimodal Registration and Fusion of Industrial CT Data - Proceedings: Digital Industrial Radiology and Computed Tomography (DIR 2015), Ghent, Belgium, 2015

[19] J. Kastner - CT for nondestructive testnig and materials characterication - 5th CIA-CT Conference and InteraqCT event on ”Industrial Applications of Computed Tomography”, Lyngby, Denmark, Denmark, 2015

[20] S. Senck, J. Kastner, B. Plank, D. Salaberger, C. Gusenbauer - Three-dimensional characterization of polymeric materials using a Talbot-Lau grating interferometer CT - Bruker microCT User Meeting, Bruges, Belgium, 2015

[21] H. Zauner, J. Kastner, D. Salaberger, C. Heinzl - 3D image processing for single fibre characterization by means of XCT - Acta Stereologica, Vol. 1, No. 1, 2015

[22] A. Reh, A. Amirkhanov, C. Heinzl, J. Kastner, E. Gröller - Fuzzy feature tracking: Visual analysis of industrial 4D-XCT data - COMPUTERS & GRAPHICS, Vol. 3, No. 1, 2015, pp. 177-184

[23] B. Fröhler, A. Amirkhanov, J. Kastner, E. Gröller, C. Heinzl - Multimodal Visualization and Analysis of Spectral and Scalar Data - Proceedings of the 9th conference for Austrian universities of applied sciences, Hagenberg, Austria, 2015, pp. 7

[24] C. Hannesschläger, V. Revol, B. Plank, D. Salaberger, J. Kastner - Fibre structure characterisation of injection moulded short fibre-reinforced polymers by X-ray scatter dark field tomography - Case Studies in Nondestructive Testing and Evaluation, Vol. 3, No. 3, 2015, pp. 34-41

[26] D. Salaberger, M. Jerabek, T. Koch, J. Kastner - Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers - Materials Science Forum, Vol. 825, No. 1, 2015, pp. 907-913

[27] F. Nachtrab, T. Hofmann, C. Speier, M. Firsching, N. Uhlmann, P. Takman, C. Heinzl, A. Holmberg, M. Krumm, C. Sauerwein, Development of a Timepix based detector for the NanoXCT project, Journal of Instrumentation Vol. 10 (Issue 11), pp. 8, November 2015

[28] J. Kastner, C. Heinzl - X-ray computed tomography for non-destructive testing and materials characterization in Integrated Imaging and Vision Techniques for Industrial Inspection (Editors: Z.Liu, H. Ukida, P. Ramuhalli, K. Niel) - Springer, 2015

[29] G. Kain, M. Barbu, K. Richter, B. Plank, G. Tondi , A. Petutschnigg - Use of tree bark as insulation material - FOREST PRODUCTS JOURNAL, Vol. 65, No. 4, 2015, pp. 16-25

[30] J. Charwat-Pessler, M. Musso, A. Petutschnigg, K. Entacher, B. Plank, E. Wernersson, S. Tangl, P. Schuller-Götzburg - A Bone Sample Containing a Bone Graft Substitute Analyzed by Correlating Density Information Obtained by X-ray Micro Tomography with Compositional Information Obtained by Raman Microscopy - MATERIALS SCIENCE, Vol. 8, No. 7, 2015, pp. 3831-3853

[31] G. Kain, J. Charwat-Pessler, M. Barbu, B. Plank, K. Richter, A. Petutschnigg - Analyzing wood bark insulation board structure using X-ray computed tomography and modeling its thermal conductivity by means of finite difference method - JOURNAL OF COMPOSITE MATERIALS, Vol. 0, No. 0, 2015, pp. 12

[32] S. Kleindel, D. Salaberger, C. Hochenauer - Measurement and Numerical Simulation of Void and Warpage in Glass Fiber Reinforced Molded Chunky Parts - INTERNATIONAL POLYMER PROCESSING, Vol. 30, No. 1, 2015, pp. 100-112

]]>
m.reiter@fh-wels.at (Super User) Publications Wed, 06 Nov 2013 21:38:42 +0100
Publications 2014 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/162-publications-2014 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/162-publications-2014

Publications 2014

[1] B. Plank, S. Senck, C. Fürst, J. Kastner - Analysis by means of X-ray computed tomography: From wood-plastic composite via carbon templates to C / Si / SiC ceramics - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[2] S. Senck, D. Salaberger, M. Kastner, A. Fuchsbauer, J. Kastner - Microbial Electrolysis Cells: threedimensional characterization of bacterial biofilm by means of high-resolution X-ray computed tomography and contrast agents - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[3] S. Senck, M. Coquerelle, G. Weber, S. Hofstaetter, J. Kastner - ESTIMATION OF MICROSTRUCTURAL PARAMETERS IN THE PROXIMAL TIBIA BY MEANS OF SHAPE REGRESSION: COMBINING HIGH RESOLUTION X-RAY COMPUTED TOMOGRAPHY AND GEOMETRIC MORPHOMETRICS - WCO-IOF-ESCEO-SEVILLE 2014, Sevilla, Spain, 2014

[4] J. Weissenböck, A. Amirkhanov, W. Li, A. Reh, A. Amirkhanov, E. Gröller, J. Kastner, C. Heinzl - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers - FiberScout: An Interactive Tool for Exploring and Analyzing Fiber Reinforced Polymers, Yokohama, Japan, 2014

[5] D. Kiefel, R. Stössel, J. Weissenböck, C. Heinzl, J. Kastner - CFRP porosity characterization using μ- Computed Tomography with optimized test parameters - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[6] S. Senck, C. Gusenbauer, M. Frelat, G. McGlynn, G. Weber, J. Kastner - Covariation between shape and bone microstructure in the proximal tibia in humans - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[7] M. Reiter, D. Weiß, C. Gusenbauer, S. Kasperl, C. Kuhn, M. Erler, J. Kastner - Evaluation of a histogram based image quality measure for X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[8] V. Revol, B. Plank, C. Kottler, J. Kastner, R. Kaufmann, A. Dommann, A. Neels - Laminate fibre structure characterisation by orientation-selective X-ray grating interferometry - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 45-51

[9] B. Plank, S. Senck, C. Fürst, H. Scharleitner, J. Kastner - Qualitative and quantitative analysis of the process chain: Wood polymer composite – C-template – C/Si/SiC-ceramic by means of X-ray computed tomography - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 55-62

[10] A. Amirkhanov, M. Reiter, J. Kastner, E. Gröller, C. Heinzl - Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[11] M. Jerabek, M. Reiter, D. Salaberger, Z. Major - Prediction of fiber orientation in short glass fiber polypropylene composites and the consequences for micromechanical simulations - Proceedings of ECCM 16 European Conference on Composite Materials, Sevilla, Spain, 2014, pp. 1

[12] D. Salaberger, M. Arikan, T. Paier, J. Kastner - Characterization of damage mechanisms in glass fiber reinforced polymers using X-ray computed tomography - Proceedings of ECCM 16 European Conference on Composite Materials, Sevilla, Spain, 2014, pp. 8

[13] J. Kastner, D. Salaberger, C. Heinzl, J. Weissenböck, M. Arikan - Quantitative measurment and visualisation of fibre orientation and fibre length distribution of fibre reinforced polymers - German Society for Non-Destructive Testing, Potsdam, Germany, 2014

[14] S. Oberpeilsteiner, T. Reiter, D. Salaberger - Modelling of short fiber reinforced materials for evaluation of effective material data - Proceedings FFH 2014, Kufstein, Austria, 2014, pp. 5

[15] S. Oberpeilsteiner, T. Reiter, D. Salaberger - Coupling of in-situ-CT with Virtual Testing by FEM of Short Fiber Reinforced Materials - Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014, pp. 7

[16] M. Aigner, D. Salaberger, T. Köpplmayr, B. Heise, S. E. Schausberger, A. Buchsbaum, D. Stifter, J. Miethlinger - CHARACTERIZATION OF DAMAGE MECHANISMS IN GLASS FIBRE REINFORCED POLYMERS USING X-RAY COMPUTED TOMOGRAPHY, Proceedings of Conference on Industrial Computed Tomography (iCT2014), Wels, Austria, 2014

[17] C. Kuhn, M. Reiter, S. Schröpfer, S. Kasperl, D. Weiss, M. Erler, CT-Wizard - Automatic determination of optimal CT measuring parameters for an unknown part, Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[18] C. Gusenbauer, M. Reiter, J. Kastner, G. Kloesch, Detection of Non-Metallic Inclusions in Steel by X-ray Computed Tomography and After Fatigue Testing, Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[19] D. Salaberger, J. Kastner, M. Arikan, T. Paier - Characterization of damage mechanisms in glass fibre reinforced polymers using X-ray computed tomography - Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT 2014), Prague, Czech Republic, 2014

[20] S. Großeiber, C. Gusenbauer, S. Ilie, E. Kozeschnik, G. Requena - Damage Initiation During Hot Deformation of a Continuously Cast Steel - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[21] T. Gross, C. Gusenbauer, A. Synek, D. Pahr - CT Image Acquisition for Implant Modeling in Bone Biomechanics - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[22] M. Schöbel, T. Cavadini, G. Baumgartner, J. Jonke, G. Requena, C. Gusenbauer - Multiscale Tomography as a Tool for Stress Measurement and Damage Characterization in a Cylinder Head Component - Proceedings of Conference on Industrial Computed Tomography (iCT 2014) Wels, Austria, 2014

[23] C. Chimani, R. Kretz, C. Angermeier, C. Gusenbauer - Investigations on Microstructure Effect of Changing Fluid Flow Characteristic in High Pressure Die Casting - Materials Science Forum, Vol. 782, 2014, pp. 8-15

[24] A. Lukeneder, S. Lukeneder, C. Gusenbauer - Computed tomography and laser scanning of fossil cephalopods (Triassic and Cretaceous) - Denisia, Vol. 32, 2014, pp. 81-92

[25] S. Großeiber, C. Gusenbauer, S. Ilie, G. Requena, E. Kozeschnik - Relevance of hot ductility tests to crack sensitivity during continuous casting of steel - Advanced Materials Research, Vol. 922, 2014, pp. 201-206

[26] S. Zaunschirm, High-resolution X-ray computed tomography studies of compressed magnesium samples, Master-Thesis, Austria

[27] A. Amirkhanov, B. Fröhler, J. Kastner, E. Gröller, C. Heinzl - InSpectr: Multi-Modal Exploration, Visualization, and Analysis of Spectral Data - Computer Graphics Forum, Vol. 33, pp. 91-100, 2014.

[28] F. Nachtrab, M. Firsching, N. Uhlmann, C. Speier, P. Takman, T. Tuohimaa, C. Heinzl, J. Kastner, DH. Larsson, A. Holmberg, G. Berti, M. Krumm, C. Sauerwein, NanoXCT: development of a laboratory nano-CT system, SPIE Optical Engineering+Applications, 92120L-92120L-8, 2014

[29] M. Sedlmair, C. Heinzl, S. Bruckner, H. Piringer, T. Moller, Visual Parameter Space Analysis: A Conceptual Framework, IEEE Transactions on Visualization and Computer Graphics (to appear), vol. 20, no. 12, 2014.

[30] K. Niel, C. Heinzl, Trends and developments in industrial machine vision: 2013, IS&T/SPIE Electronic Imaging, 902405-902405-6, 2013

[31] A. Amirkhanov, S. Bruckner, C. Heinzl, E. Gröller, The Haunted Swamps of Heuristics: Uncertainty in Problem Solving, Scientific Visualization, Springer London, 51-60

[32] C. Heinzl, S. Bruckner, E. Gröller, Guest editorial—Uncertainty and parameter space analysis in visualization, Computers & Graphics 41 (Complete), A1-A2

[33] J. Weissenböck, A. Reh, D. Salaberger, C. Heinzl, J. Kastner, Advanced Visualization and Exploration Techniques for Fiber Reinforced Polymers, 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic

[34] C. Heinzl, J. Weissenböck, A. Reh, J. Kastner, T. Dierig, T. Günther, D. Kiefel, R. Stössel, Software tools for robust extraction, analysis and visualization of porosities in XCT scans of fiber-reinforced polymers, 6th Symposium for NDT in Aerospace, 12-14 November 2014, Madrid, SPAIN

]]>
m.reiter@fh-wels.at (Super User) Publications Wed, 06 Nov 2013 21:38:42 +0100
Publications 2013 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/144-publications-2013 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/144-publications-2013

Publications 2013

[1] J. Kastner, B. Plank, D. Salaberger, High resolution X-ray computed tomography for quantitative characterization of fiber reinforced polymers and heterogeneous light metals, Proceeding ASNT 22nd Annual Research Symposium, 18.-21. March 2013, Memphis, United States of America

[2] J. Charwat-Pessler, M. Musso, K. Entacher, B. Plank, P. Schuller-Götzburg, S. Tangl, A. Petutschnigg - Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy - Journal of Applied Mathematics, 2013, pp. 8 (Accepted)

[3] B. Plank, F. Ellert, J. Gruber, C. Gusenbauer, J. Kastner - Detection of defects in carbon fiber reinforced polymers by means of visual inspection, ultrasonic testing, digital radiography, active thermography and Xray computed tomography. - DGZfP Annual Conference 2013, Dresden, Germany, 2013, pp. 9 (Accepted)

[4] V. Revol, B. Plank, R. Kaufmann, J. Kastner, C. Kottler, A. Neels - Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer - NDT & E INTERNATIONAL, Vol. 58, pp. 64-71, 2013

[5] B. Plank, C. Gusenbauer, D. Salaberger, J. Kastner - Computed tomography links together: A wide range of applications enables interdisciplinary collaborations with research, industry and business - Proceedings FFH 2013, Dornbirn, Austria, 2013, pp. 480-483

[6] T. Köpplmayr, I. Milosavljevic, M. Aigner, R. Hasslacher, B. Plank, D. Salaberger, J. Miethlinger - Influence of fiber orientation and length distribution on the rheological characterization of glass-fiber-filled polypropylene - POLYMER TESTING, Vol. 31, No. 3, 2013, pp. 535-544

[7] W. Stefanie, T. Gruenewald, S. Ostrowski, B. Plank, G. Standfest, B. Mies, A. Petutschnigg - Assessment of mechanical properties of wood-leather panels and the differences in the panel structure by means of X-ray computed tomography - BioResources, Vol. 8, No. 1, 2013, pp. 818-832

[8] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl. Advanced Visualization Methods for Porosity in Carbon Fiber Reinforced Polymers. 1st International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, 2013, pp. 4

[9] A. Amirkhanov, C. Heinzl, C. Kuhn, J. Kastner, E. Gröller, Fuzzy CT Metrology: Dimensional Measurements on Uncertain Data, SCCG 2013: Spring Conference on Computer Graphics, Smolenice castle, Slovakia, 2013

[10] A. Reh, C. Gusenbauer, J. Kastner, E. Gröller, C. Heinzl - MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 19, No. 12, 2013, pp. 2906-2915

[11] C. Heinzl, J. Kastner - Quantitative Inspection of Complex Composite Aeronautic Parts Using Advanced Xray Technique - Proceedings 3rd EASN Workshop on Aerostructures, Milan, Italy, 2013, pp. 5

[12] D. Salaberger, S. Gleiß, J. Kastner - Comparison of methods to determine fibre length distribution: X-ray CT versus standard method - Int. Conf. Structural Analysis of Advanced Materials, Kos, Greece, 2013

[13] M. Aigner, D. Salaberger - The influence of glass fibres on the longational viscosity studied by means of optical coherence tomography and X-ray computed tomography - PPS 29 Proceedings, Nürnberg (Deutschland) / Nuremberg (Germany), Germany, 2013

[14] D. Salaberger, S. Oberpeilsteiner, M. Palmstingl, T. Koch, J. Kastner: Modellierung von Schädigungsmechanismen von kurz faserverstärkten Polymeren mit Hilfe von Computertomografie – DGM Werkstoffprüfung Proceedings, Neu-Ulm, Deutschland, November 2013 (Accepted)

[15] D. Salaberger, W. Li, J. Kastner - Characterization of bent cellulose fibres using Micro-CT analysis, 1st International Conference on Tomography of Materials and Structures (ICTMS 2013), Ghent, Belgium, 2013

[16] C. Gusenbauer, J. Kastner, B. Plank, S. Baumgartner, B. Harrer, G. Requena, G. Garcés - Microstructure characterization of thermomechanically treated Al- and Mg-alloys by high resolution X-ray computed tomography - Euromat, Sevilla, Spain, 2013

]]>
m.reiter@fh-wels.at (Super User) Publications Thu, 23 May 2013 13:34:49 +0200
Publications 2012 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/101-publications-2012 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/101-publications-2012

Publications 2012

[1] J. Kastner, B. Harrer, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[2] J. Kastner, D. Salaberger, B. Plank, High resolution X-ray computed tomography of fibre and particle filled polymers, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[3] J. Kastner, B. Plank, C. Kottler, V. Revol, Comparison of phase contrast X-ray computed tomography methods for non-destructive testing of materials, Proc. of 12th World Conference on Non-Destructive Testing, WCNDT 2012, 15.-12. April 2012, Durban/South Africa

[4] D. Salaberger, T. Koch, Y. Voronko, S. Seidler, J. Kastner, Comparison of particle size distribution derived from 2D and 3D analysis for particle filled polymers, Proceedings POLYCHAR 2012, World Forum on Advanced Materials, 26-30. March 2012 Dubrovnik, Croatia

[5] J. Kastner, B. Plank, G. Requena, Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography, Materials characterization 64, 79-87 (2012)

[6] A. Reh, B. Plank, J. Kastner, E. Gröller, C. Heinzl, Porosity Maps - Interactive Exploration and Visual Analysis of Porosity in Carbon Fiber Reinforced Polymers - COMPUTER GRAPHICS FORUM 31, No. 3, 1185-1194 (2012)

[7] C. Heinzl, J. Kastner, A. Amirkhanov, E. Gröller, C. Gusenbauer, Optimal Specimen Placement in Cone Beam X-ray Computed Tomography - NDT & E INTERNATIONAL 99, 1-25 (2012)

[8] J. Kastner, B. Plank, D. Salaberger, K. Kannappan, Quantitative Evaluierung von Röntgen-CT-Daten von glasfaserverstärkten Kunststoffen zur Bestimmung von Faserlängenverteilung und -orientierung. Proceeding FFH 2012, April 2012, Graz

[9] J. Kastner, B. Plank, C. Gusenbauer, B., G. Requena, 3D-Mikrogefügeuntersuchungen an Leichtmetalllegierungen mittels hochauflösender Röntgen-Computertomografie, Proceedings 7. Ranshofener Leichtmetalltage, 7.+8. Nov. 2012, Gmunden

[10] M. Reiter, M. Krumm, S. Kasperl, C. Kuhn, M. Erler, D. Weiß, C. Heinzl, C. Gusenbauer, J. Kastner, Evaluation of transmission based image quality optimisation for X-ray computed tomography, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[11] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, E. Gröller, Evaluation of Projection-Based Metal-Artifact Reduction for Multi-Material Components, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[12] J. Charwat-Pessler, E. Wernersoon, B. Plank, M. Musso, K. Entacher, P. Schuller-Götzburg, G. Standfest, B. Mies, A. Petutschnigg, 3D Analysis of heterogenous and biogenic structures based on bone augmentation material, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[13] M. Jerabek, M. Reiter, H. Herbst; B. Plank, D. Salaberger, Z. Major, Characterization of Short Fiber Reinforced Polypropylene Composites, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[14] M. Tóth, G. Moser, C. Gusenbauer, Analysis of the middle ear mechanics with micro-CT, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[15] S. Großeiber, G. Requena, E. Kozeschnik, C. Gusenbauer, S. Ilie, Correlation between hot ductility and damage in microalloyed steel slabs, Proc. of Conference on Industrial Computed Tomography (iCT 2012) 19.-20. September 2012, Wels/Austria

[16] B. Plank - Vom Granulat zum Spritzgussbauteil: Einfluss der Spritzgussprozesskette auf die Faserlängenverteilung bestimmt durch Röntgen- Computer-Tomografie. - Master/Diploma Thesis, FH OÖ Studienbetriebs GmbH, Österreich, 2012, pp. 150

[17] G. Standfest, A. Kutnar, B. Plank, A. Petutschnigg, F. Kamke, M. Dunky - Microstructure of viscoelastic thermal compressed (VTC) wood using computed microtomography - WOOD SCIENCE AND TECHNOLOGY, Vol. 46, No. 4, 2012, pp. 19

[18] T. Koch, D. Salaberger, Methods for Characterizing the 3-D Morphology of Polymer Composites, MACROMOLECULAR SYMPOSIA, Vol. 315, No. 1, 2012, pp. 115-124

[19] D. Salaberger, H. Scharleitner, J. Kastner, 3D Analyse der Tinteausbreitung in Polymerschäumen mit Hilfe von Röntgen-Mikro Computertomografie, DACH-Jahrestagung 2012, 17.-19. September 2012, Graz/Austria

[20] H. Qureshi, M. Malik, M.A. Ahmad, C. Heinzl, Benchmarking of De-noising Techniques for Streaking Artifacts in Industrial 3DXCT Scan Data, 20th International Conference on Computer Graphics, Visualization and Computer Vision 2012, WSCG 2012, June 25-28, 2012, Pilsen, Czech Republic, pp. 8

[21] J. Kastner, D. Salaberger, B. Plank, A. Reh, C. Heinzl - Advanced X-ray tomographic methods for quantitative characterisation of carbon fibre reinforced polymers - Proceedings 4th International symposium on NDT in Aerospace, Augsburg, Germany, 2012

[22] J. Kastner, D. Salaberger, B. Plank - High resolution X-ray computed tomography of fibre and particle reinforced plastics - DACH NDT Annual Meeting 2012, Graz, Austria, 2012

[23] B. Heise, S. Schausberger, S. Häuser, B. Plank, D. Salaberger, E. Leiss-Holzinger, D. Stifter - Full-field optical coherence microscopy with a sub-nanosecond supercontinuum light source for material research - OPTICAL FIBER TECHNOLOGY, Vol. 18, No. 5, 2012, pp. 403-410

[23] G. Standfest, M. Dunky, S. Kranzer, B. Plank, D. Salaberger, A. Petutschnigg - 3D pore size characterisation by means of image analysis and mathematical morphology - JOURNAL "HOLZTECHNOLOGIE", Vol. 53, No. 5, 2012, pp. 39-45

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 18 Jan 2013 09:03:03 +0100
Publications 2011 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/102-publications-2011 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/102-publications-2011

Publications 2011

[1] J. Kastner, B. Harrer, and H.-P. Degischer, High resolution cone beam x-ray computed tomography for 3D-microstructure characterization of Al-alloys, Materials characterization 62, 99-107 (2011)

[2] D. Salaberger, K.A. Kannappan, J. Kastner, J. Reussner, and T. Auinger, CT Data evaluation of fibre reinforced polymers to determine fibre length distribution, International Polymer Processing 3, 283-291 (2011)

[3] J. Kastner, R. Kickinger, and D. Salaberger, High resolution X-ray computed tomography for 3D-microstructure characterisation of a cellulose particle filled polymer foam, Journal of cellular plastics 47, 567-578 (2011)

[4] A. Amirkhanov, C. Heinzl, M. Reiter, J. Kastner, and E. M. Gröller, Projection-Based Metal-Artifact Reduction for 3DCT, IEEE Transactions on Visualization and Computer graphics 17, 2193 - 2202 (2011)

[5] M. Rodríguez-Hortalá, D. Salaberger, S. Hernández, M. Holzmeier, H.-P. Degischer, and J. Kastner, Mechanical and structural characterisation of defects in CFRP (carbon fibre reinforced polymer) materials, DGM-Symposium für Verbundwerkstoffe und Werkstoffverbunde, 30. March- 1. April 2011, Chemnitz/GE

[6] C.Heinzl, A.Amirkhanov, J.Kastner, E.Göller, M.Reiter, Fast estimation of optimal specimen placements in 3D X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[7] J. Kastner, D. Salaberger, and B. Plank, Phase contrast imaging with high resolution cone beam X-ray computed tomography, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[8] M. Reiter, B. Harrer, D. Salaberger, C. Heinzl, C. Gusenbauer, C. Kuhn, and J. Kastner, Simulation aided study for optimising device parameters of an industrial X-ray computed tomography system for non-destructive testing and materials characterisation, International Symposium on Digital Industrial Radiology and Computed Tomography 2011, 20.-22. June 2011, Berlin/GE

[9] B. Harrer, G. Requena, H.-P. Degischer, G. Xia, S. Ilie, and J. Kastner, 3D distribution of pores in continuously cast steel slabs investigated by multi-scale X-ray computed tomography, EUROMAT 2011, Sep. 2011, Montpellier/F

[10] C. Gierl, B. Harrer, H. Danninger, J. Kastner, R. Schneider, X-ray computed Tomography for Quantification of Secondary Pore Structures in PM Steels, International Conference on Deformation and Fracture in PM materials – DFPM 2011, 6–9. November, 2011, Stará Lesná, High Tatras, Slovakia

[11] J. Kastner, B. Harrer, R. Kickinger, G. Requena, Microstructure characterization of high-strength Al-alloys by high resolution X-ray computed tomography, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011

[12] J. Kastner, B. Plank, D. Salaberger, High resolution absorption and phase contrast computed tomography with a polychromatic X-ray source for materials characterization, 3DMM - 3D Microstructure Meeting, Saarbrücken, Germany, November 2nd – 4th, 2011

[13] B. Harrer and J. Kastner, Bookchapter: Cone Beam CT for non-destructive testing Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, X-ray Microtomography: characterisation of structures and defect analysis, Springer Verlag, Heidelberg, 119-150, 2011

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 17 Aug 2012 11:56:00 +0200
Publications 2010 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/103-publications-2010 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/103-publications-2010

Publications 2010

  1. [1] J. Kastner, B. Plank, D. Salaberger, J. Sekelja, Defect and porosity determination of fibre reinforced polymers by x-ray Computed Tomography, 2nd Int. Symposium on NDT in Aerospace, Hamburg, D, Germany, 2010
  2. [2] E. Heiss, D. Salaberger, Hurt yourself to hurt your enemy: new insights on the function of the bizarre antipredator mechanism in the salamandrid Pleurodeles waltl, JOURNAL OF ZOOLOGY, Vol. 280, No. 2, 2010, pp. 156-162
  3. [3] G. Mayr, B. Plank, J. Sekelja, G. Hendorfer, Pulsed Thermography and Ultrasonic Testing for Non Destructive Testing of Porous Carbon Fiber Reinforced Polymers. NDT&E Int. 2010. (submitted)
  4. [4] S. Rosner, J. Konnerth, B. Plank, D. Salaberger, C. Hansmann, Radial shrinkage and ultrasound acoustic emissions of fresh versus pre-dried Norway spruce wood, Trees Structure and Function.
  5. [5] B. Chyba, M. Mantler, M. Reiter, Monte Carlo Simulation for the evaluation of various influence factor for on projections in computed tomography, Powder Diffraction Journal Vol. 25
  6. [6] B. Plank, D. Salaberger, J. Kastner, High Resolution X-ray CT for Polymer Materials Science - 2nd Int. Symposium on NDT in Aerospace, Hamburg, Germany, 2010, pp. 3
  7. [7] C. Heinzl, M. Reiter, M. Allerstorfer, E. Gröller, J. Kastner, Artefaktreduktion mittels Dual Viewing für Röntgencomputertomographie von Multimaterialbauteilen, DGZfP Erfurt, Germany, 2010
  8. [8] J. Kastner, B. Harrer, G. Requena, O. Brunke, A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys. NDT&E Int. 2010, Vol. 43, No. 10, 2010, pp. 599-605
  9. [9] G. Standfest, S. Kranzer, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, 3D Microstructure Characterization of Wood Based Panels, Proceedings 1st International Conference on Processing Technologies for the Forest and Biobased Products Industries, Kuchl, Austria, 2010, pp. 6
  10. [10] G. Standfest, D. Salaberger, B. Plank, A. Petutschnigg, M. Dunky, Sub-micron-CT for the characterization of wood based panels, Journal "HOLZTECHNOLOGIE", Vol. 51, No. 4, 2010, pp. 44-49
  11. [11] B. Plank, J. Kastner, J. Sekelja, D. Salaberger - Porositätsbestimmung in kohlefaserverstärkten Kunststoffen mittels Röntgen-Computertomografie - Tagungsband des 4. Forschungsforum der österreichischen Fachhochschulen, Pinkafeld, Österreich, 2010, pp. 321-328
  12. [12] D. Salaberger, B. Plank, B. Harrer, J. Kastner, O. Brunke, H. Degischer, Comparative study of high resolution cone beam X-ray computed tomography methods and discussion of temperature influence on Nanotom stability, Book of Abstracts: High Resolution X-ray CT Symposium, Dresden, Germany, 2010, pp. 37
  13. [13] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, J. Kastner, Study on parameter variation of an industrial computed tomography simulation tool concerning dimensional measurement deviations, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  14. [14] B. Harrer, H.P. Degischer, J. Kastner, Microfocus computed x-ray tomography of segregations in high strength aluminium alloys, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  15. [15] J. Kastner, B. Harrer, V. Carl, H. Traxler, Computed tomography and pulsed thermography of carbon reinforced carbon/copper components for thermo-nuclear fusion. Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  16. [16] C. Heinzl, J. Kastner, E. Gröller, Uncertainty Visualization of Computed Tomography Datasets from Industrial Components using Statistical Analysis, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  17. [17] M. M. Malik, C. Heinzl, E. Gröller - Comparative Visualization for Parameter Studies of Dataset Series - IEEE Transactions on Visualization and Computer Graphics (TVCG), Vol. 9999, No. 9999, 2010, pp. 8
  18. [18] J. Kastner, R. Kickinger, D. Salaberger, Structural analysis of polymeric foams by Sub-µm X-Ray computed tomography, CNDT 2010, Proc. of 10th European Conference on Non-Destructive Testing, Moscow, 7.-11. June 2010
  19. [19] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, J. Reussner, T. Auinger, CT Data Evaluation of Fibre Reinforced Polymers to Determine Fibre Length Distribution, PPS26-2010, Banff, Canada, Canada, 2010
  20. [20] S. Müller, D. Salaberger, Analysis of a belt buckle from Mautern on a technical basis, Archaeology, Austria, Vol. 21, No. 1, 2010, pp. 60-65
  21. [21] J. Kastner, B. Harrer, D. Salaberger, X-Ray Computed Tomography of materials for light-weight applications in Energyefficient Mobility, Shaker Verlag, 2010
  22. [22] J. Kastner, Proceedings Industrielle Computertomografie 2010, Wels, Austria, 2010
  23. [23] M. Reiter, C. Heinzl, D. Salaberger, D. Weiss, C. Kuhn, J. Kastner, Simulative Parameteroptimierung für Metrologie an Multi-Materialbauteilen mit industrieller Röntgen Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 163-173
  24. [24] D. Salaberger, K. Arunachalam Kannappan, J. Kastner, Method for the 3D characterisation of fibres in reinforced polymers, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 51-58
  25. [25] M. Hochegger, B. Harrer, S. Ilie, H.P. Degischer, Darstellung von Schädigungsmechanismen in Baustahlbrammen mittels Röntgen-Computertomografie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 93-100
  26. [26] J. Crespo-Casanova, H.P. Degischer, C. Ladron, E. Maire, K. Track, B. Harrer, In-situ Zugversuche an Sphärogussproben im Synchrotron-Strahl, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 101-105
  27. [27] M. Wurm, C. Hofer, H. Traxler, A. Zabernig, B. Harrer, Vermessung der Laserbohrungen in faserverstärktem Graphit mittels Optischer Kohärenztomographie, Proceedings Industrial Computed Tomography 2010, Wels, Austria, 2010, pp. 133-139
  28. [28] G. Standfest, S. Kranzer, B. Plank, A. Petutschnigg, M. Dunky, Anwendung der Sub-µm CT zur Charakterisierung von Holzwerkstoffen, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 65-70
  29. [29] B. Plank, J. Sekelja, G. Mayr, J. Kastner, Porositätsbestimmung in der Flugzeugindustrie mittels Röntgen-Computertomografie, Proceedings Industrielle Computertomografie Fachtagung 2010, Wels, Austria, 2010, pp. 25-34
  30. [30] A. Amirkhanov, C. Heinzl, M. Reiter, E. Gröller, Visual Optimality and Stability Analysis of 3DCT Scan Positions, 21st IEEE Visualization Conference, Salt Lake City, Utah, USA, 24-29. October 2010
  31. [31] J. Crespo-Casanova, H.P. Degischer, C. Landron, E. Maire, B. Harrer, K. Track, Rissfortschritt in Sphärogussproben durch in-situ Zugversuche im Synchrotron-Strahl, Tagung Werkstoffprüfung, Neu-Ulm, 2. - 3. Dez. 2010. (in print)
  32. [32] M. Schöbel, V. Paffenholz, B. Harrer, M. Di Michiel, H.P. Degischer, 3D Characterization of Thermal Fatigue Damage in SiC Fiber Reinforced Copper, 13. Internationale Metallographie-Tagung, Leoben, 29. Sept. - 1. Okt. 2010 (in print)
  33. [33] B. Harrer, J. Kastner, X-ray Microtomography, characterisation of structures and defect analysis, Fabrication and Characterization in the Micro-Nano Range: New Trends for two and three Dimensional Structures, Springer Verlag, Heidelberg, 2010, pp 32 (in print)
]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 20 Jul 2012 13:50:23 +0200
Publications 2009 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/104-publications-2009 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/104-publications-2009

Publications 2009

  1. G. Zauner, B. Harrer, Bildsegmentierung mittels Multiresolution - Bildverarbeitung zur Detektion von Graphiteinschlüssen in 3D-Computertomographie Aufnahmen. Vortrag: 3. Forschungsforums der österreichischen Fachhochschulen–FFH 2009, Villach, 15. - 16. April 2009. Tagungsband des 3. Forschungsforums. Fachhochschule Kärnten (ed.), 2009, 5 S.
  2. B. Plank, J. Kastner, R. Schneider, R. Busch - Characterisation of porosities in sinter-metalls by X-ray computed tomography - Example selective laser sintering - Proceedings DGZfP annual conference 2009, Münster, Germany, 2009, pp. 810-816
  3. M. Reiter, M.M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner, Improvement of X-ray image acquisition using a GPU based 3DCT simulation tool, SPIE Quality Control by Artificial Vision Wels, AUSTRIA, May 27-29, 2009
  4. B. Harrer, Detektierbarkeit von Heterogenitäten in Fe- Basis- und Aluminiumlegierungen mittels Röntgen-Computertomographie. Technische Universität Wien, Fakultät für Maschinenwesen und Betriebswissenschaften, Institut für Werkstoffwissenschaft und Werkstofftechnologie, Diss., Juli 2009, S. 1-229.
  5. B. Chyba, M. Mantler, M. Reiter, Monte-Carlo simulations for evaluation of different influences on projections in computed tomography, Denver X-Ray Conference 2009, Denver, United States of America, July 27-31, 2009
  6. G. Mayr, G. Hendorfer, B. Plank, J. Sekelja - Porosity determination in CFRP by means of pulsed thermography combined with effective thermal diffusivity models - American Institute of Physics Conference Proceedings, Kingston, United States of America, 2009, pp. 8
  7. D. Salaberger, B. Darmstädter, Integral Curve versus Separate Bell. New Aspects on the Construction Modes of Crumhorns, Conference on Interdisciplinary Musicology (CIM09), Paris, France, October 26-28, 2009
  8. C. Heinzl, J. Kastner, E. Gröller - Application of Statistical Analysis for Uncertainty Visualization of Computed Tomography Data from Multi Material Components - Proceedings of Quality Control by Artificial Vision 2009, Wels, Austria, 2009, pp. 8
  9. M. Reiter, M. M. Malik, C. Heinzl, D. Salaberger, E. Gröller, H. Lettenbauer, J. Kastner - Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool - Proceedings of Quality Control by Artificial Vision 2009, Wels, Austria, 2009, pp. 998-999
  10. J. Kastner, C. Heinzl - Genauigkeitsoptimierung der Röntgen-Computertomographie für die Geometriebestimmung und Visualisierung der Messunsicherheit - Proceedings DGZfP annual conference 2009, Münster, Germany, 2009, pp. 8
  11. C. Heinzl, J. Kastner, E. Gröller - Computed tomography of multi-material components and evaluation using statistical analysis - Proceedings FFH 2009, Villach, Austria, 2009, pp. 8
  12. M. M. Malik, C. Heinzl, E. Gröller - Computation and Visualization of Fabrication Artifacts - Journal of WSCG, Vol. 17, No. 1, 2009, pp. 17-24
  13. C. Heinzl - Analysis and visualization of industrial CT data - Phd Thesis, Technische Universität Wien, Institut für Computergraphik und Algorithmen, Austria, 2009, pp. 110
  14. M. Grabner, D. Salaberger, The need of high resolution, X-ray CT in dendrochronology and in wood identification, 6th International Symposium on Image and Signal Processing and Analysis, Salzburg, Austria, 2009, pp. 349-352 

 

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 20 Jul 2012 13:49:56 +0200
Publications 2008 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/105-publications-2008 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/105-publications-2008

Publications 2008

[1] C. Heinzl, J. Kastner, E. Gröller, Geometriebestimmung von Multimaterialbauteilen und reproduzierbare Oberflächenextraktion, Proceedings Industrielle Computertomografie-tagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[2] B. Harrer, B. Plank, D. Moore, J. Kastner, H.P. Degischer, Röntgen-Computertomographie zur Charakterisierung von Heterogenitäten in metallischen Werkstoffen, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[3] D. Stifter, E. Breuer, M. Wurm, K. Wiesauer, E. Schlotthauer, J. Kastner, Optische Kohärenztomografie und Röntgen-Computertomografie für die Charakterisierung von Kunststoffmaterialsystemen, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[4] D. Salaberger, J. Kastner, Röntgen-Computertomografieuntersuchungen an der Saliera und an Holzblasinstrumenten aus der Renaissance, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[5] K. Ch. Schuster, D. Salaberger, J. Kastner, Computertomografie zur Visualisierung von Wasser auf Textilien, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[6] H. Traxler, B. Harrer, J. Kastner, Anwendung der Computertomografie auf Komponenten der Kernfusionstechnik, Proceedings Industrielle Computertomografietagung, Wels, Austria, 26.+27. February 2008, ISBN 978-3-8322-6949-4, Shaker Verlag, Aachen, 2008

[7] D. Salaberger, J. Kastner, Computertomografiemessungen an der Saliera und an Holzblasinstrumenten aus der Renaissance, Proceedings 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Austria, 25.+26. März 2008, Shaker Verlag, Aachen, 2008

[8] J. Kastner, F. Pfeifer, C. Heinzl und R. Freytag, Pipeline zur dreidimensionalen Auswertung und Visualisierung der Faserverteilung in glasfaserverstärkten Kunststoffteilen aus µ-Röntgen-Computertomografiedaten, DACH-Jahrestagung 2008 in St. Gallen, 28.-30. April 2008

[9] M. Reiter, S. Kunzmann, H. Lettenbauer, B.Chyba, M. Mantler, J. Kastner, Simulation eines industriellen 3D-Röntgen-Computertomographen zur verbesserten Geometriebestimmung, DACH-Jahrestagung 2008 in St. Gallen, 28.-30. April 2008

[10] J. Kastner, D. Salaberger, G. Zitzenbacher, W. Stadlbauer, R. Freytag, Determination of diameter, length and three-dimensional distribution of fibres in short glass-fibre reinforced injection moulded parts by µ-X-ray computed tomography, Proceedings Polymer processing society 24th annual meeting, 15.-19. June 2008, Salerno/I

[11] J. Kastner, F. Pfeifer and R. Freytag, Method for three-dimensional evaluation and visualisation of the distribution of fibres in glass-fibre reinforced injection moulded parts by µ-X-ray computed tomography, 17th World Congress on Non-destructive Testing, 25.-28. Oktober 2008, Shanghai/China

[12] B. Harrer, J. Kastner and H.-P. Degischer, Opportunities in the Detection of Inhomogeneities in Steel by Computed Tomography, 17th World Congress on Non-destructive Testing, 25.-28. Oktober 2008, Shanghai/China

[13] G. R.F. Mahr, C. Hinterhofer, H. Haider, D. Salaberger, J. Kastner, K. Grösslinger and D. Lorinson, Journal of the American Veterinary Medical Association, "Finite element modeling of the stabilization of a simple, not-dislocated fracture of the feline radius and ulna with an extramedullary interlocking nail"

[14] D. Schamall, M. Teschler-Nicola, T. Kohler, R. Müller, D. Salaberger, B. Patzak, J. Kastner, S. Tangl, Micro-Computed Tomography and Light-Microscopy in Historical Vertebrae: A Morphologic and Histomorphometric Analysis, American Journal of Physical Anthropologists

[15] D. Stifter, K. Wiesauer, M. Wurm, E. Schlotthauer, J. Kastner, M Pircher, E. Götzinger and C. K. Hitzenberger, Investigation of polymer and polymer/fibre composite materials with optical coherence tomography Measurement Science& Technology, special issue on Digital Holography and Optical Tomography

[16] B. Harrer, C. Gierl, H. Danninger, J. Kastner, R. Schneider, Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen, Werkstoffkolloquium FH-Campus Wels 2008, 28. Mai 2008

[17] M.Hochegger, B. Harrer, H.P. Degischer, Sergiu Ilie: Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen, 42. Metallographie-Tagung, Jena, 17.–19. September 2008

[18] M.Hochegger, J. Six, H.P. Degischer, Sergiu Ilie, B. Harrer: Deformation of continuously cast Carbon Steels in the Range of γ-α Transformation, 3rd International Conference on Thermomechanical Processing of Steels, Padua, 10.-12. September 2008

[19] H. Traxler, B. Harrer, A. Zabernig, T. Friedrich, L.S. Sigl, J. Kastner, Computed Tomography of Components for Nuclear Fusion Experiments, Materials Science and Engineering, Nürnberg, 1. – 4. September 2008

[20] H. Traxler, S. Gerzoskovitz, L. Sigl, B. Harrer, J. Kastner, Pulsed Thermography of CFC Monoblock Divertor Components, 25th Symposion on Fusion Technology - SOFT 2008, Rostock, 15. – 19. September 2008

[21] M.Hochegger, B. Harrer, H.P. Degischer, S. Ilie, Röntgen-Computertomografie der Verformungsporen in Warmzugproben aus Baustahlbrammen, 42. Metallographie-Tagung, Jena, 17.–19. September 2008

[22] M. Reiter, H.Lettenbauer, J.Kastner, Simulation of an industrial x-ray cone beam computed-tomography system, IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, Dresden, 22-24 September 2008

[23] C. Heinzl, J. Kastner, E. Gröller, Statistische Analyse von Multi-Material Bauteilen, Proceedings 2. Forschungsforum der österreichischen Fachhochschulen, Wels, Austria, 25.+26. März 2008, Shaker Verlag, Aachen, 2008

[24] C. Heinzl, J. Kastner, E. Gröller, High Dynamic Range Imaging for Contrast Enhancement of X-Ray-Images, IEEE Workshop on X-Ray Micro Imaging of Materials, Devices, and Organisms, 22-24 October 2008 Dresden, Germany

[25] C. Heinzl, J. Kastner, T. Möller, E. Gröller, Statistical analysis of Multi-Material Components using Dual Energy CT, VMV08, 08.-10.2008, Konstanz/Germany

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 17 Aug 2012 11:45:10 +0200
Publications 2007 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/106-publications-2007 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/106-publications-2007

Publications 2007

[1] R. Engelke, G. Ahrens, N. Arndt-Staufenbiehl, S. Kopetz, K. Wiesauer, B. Löchel, H. Schröder, J. Kastner, A. Neyer, D. Stifter and G. Grützner, Investigations on possibilities of inline inspection of high aspect ratio microstructures, Microsystem Technologies Vol 13/3-4, 319-325, 2007

[2] J. Kastner, E. Schlotthauer, E. Breuer, K. Wiesauer und D. Stifter, Materialprüfung 4/2007, "Optische Kohärenztomografie und 3D-Röntgen-Computertomografie: Zwei Methoden zur zerstörungsfreien Materialprüfung und dimensionellen Messung", 2007

[3] J. Kastner, D. Salaberger, C. Heinzl, Messung von Mikrobauteilen und reproduzierbare Oberflächenextraktion, 229 PTB-Seminar, Geometriebestimmung mit industrieller Computertomografie, Braunschweig, 13.+14. März 2007, PTB-F-54, ISBN 978-3-86509-703-3

[4] J. Kastner, B. Harrer und D. Salaberger, Proceedings FHK F&E Forum, 11.-12.April 2007, "3D-Röntgen-Computertomografie für die zerstörungsfreie Werkstoffprüfung"

[5] J. Kastner, E. Schlotthauer, D. Angermaier, G. Zitzenbacher und W. Stadlbauer, Jahrestagung der DGZfP in Fürth, 14.-16.Mai 2007, "Quantitative Messung von Faserlängen und -verteilung in faserverstärkten Kunststoffteilen mittels µ-Röntgen-Computertomographie"

[6] B. Harrer, J. Kastner, A. Kottar, H.P. Degischer, Jahrestagung der DGZfP in Fürth, 14.-16. Mai 2007, "Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie"

[7] J. Kastner, D. Salaberger, M. Grabner, J. Reschreiter und M. Mehofer, Archäologie Österreichs, "MikroRöntgencomputer-tomografie: Eine zerstörungsfreie Methode für die Archäologie", (2007)

[8] Christoph Heinzl, Johann Kastner, Bernd Georgi and Hubert Lettenbauer, International Symposium on Digital industrial Radiology and Computed tomography, Lyon/France, 25.-27.June 2007, "Comparison of surface detection methods to evaluate cone beam computed tomography data for three dimensional metrology, Int. Symposium on Digital Industrial Radiology and Computed Tomography"

[9] J. Kastner, E. Schlotthauer, D. Angermaier, G. Zitzenbacher, Mikro- und Nano-Computertomografie für die dreidimensionale Charakterisierung von faserverstärkten Verbundwerkstoffen, ISM Sensorik 2007, Linz, 4. Okt. 2007

[10] G. Zauner, B. Harrer, D. Angermaier, M. Reiter and J. Kastner, Multiscale segementation method for small inclusion detection in 3D-industrial computed tomography, EOS Conference on trends in optoelectronics, Munich, 17.-19. June 2007

[11] B.Chyba, M.Mantler, M.Reiter, Monte-Carlo simulations of projections in computed tomography, Denver X-Ray Conference 2007, Denver, United States of America, 2007

[12] B. Harrer, W. Winkler, N. Lintner, A. Kottar, J. Kastner, H.P. Degischer, Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in metallischen Gussgefügen, DGM Metallographietagung, Sep. 07, Bremen.

[13] C. Heinzl, J. Kastner and E. Gröller, Surface extraction from multi-material components for metrology using dual energy CT,IEEE Transactions on Visualization and Computer graphics, Vol 13, 3, 1520-1528, 2007

[14] J. Kastner, D. Salaberger, Kyriacos Efstathiou, Röntgencomputertomografieuntersuchungen an metallischen Fundstücken aus Griechenland, Archäologie Österreichs 18/2, 64, 2007 [15] G. Windisch, D. Salaberger, W. Rosmarin, J. Kastner, G. U. Exner, V. Haldi- Brändle and F. Anderhuber, Journal of Orthopedic Research, "Clubfoot model based on Micro- CT data" [16] K. Schicho, J. Kastner, R. Klingesberger, R. Seemann, G. Enislidis, G. Undt, F. Wanschitz, M. Figl, A. Wagner, R. Ewers, Clinical Oral Implants Research, "Surface area analysis of dental implants using micro-CT", (2007).

[17] Griesser, G. Buchinger, T. Raab, D. P. Claassen, D. Meissner – Charcterization of Fuel Cells and Fuel Cell Systems Using Three-Dimensional X-Ray Tomography – Journal of Fuel Cell Science and Technology, Vol. 4, No. 1, 2007, pp. 84-87 

 

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 17 Aug 2012 12:00:44 +0200
Publications 2006 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/107-publications-2006 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/107-publications-2006

Publications 2006

[1] J. Kastner, D. Heim, D. Salaberger, Jahrestagung der ÖGZfP, Wien, 9.-10.März 2006, "Zerstörungsfreie Werkstoffprüfung mit Industrieller Computertomografie"

[2] J. Kastner, D. Heim, D. Salaberger, C. Sauerwein, and M. Simon, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, "Advanced applications of Computed Tomography by combination of different methods"

[3] C. Heinzl, J. Kastner and E. Gröller, European Conference on Non-Destructive Testing, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, "Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography"

[4] C. Heinzl, R. Klingesberger, J. Kastner and E. Gröller, Eurographics/IEEE-VGTC Symposium on Visualisation 2006, Lissabon, 8.-10.Mai 2006, “Robust Surface Detection for Variance Comparison"

[5] J. Kastner, B. Harrer und D. Salaberger, 4. Ranshofener Leichtmetalltage: Vom Werkstoff zum Bauteilsystem (LKR Verlag, 2006, S79-90), Salzburg, 17.-18.Okt. 2006, "Anwendungen der 3D-Röntgen-Computertomografie im Leichtmetallguss und im Leichtbau"

[6] B.Tomic, B.Harrer, A.Kottar, H.P. Degischer, L.Zeipper, J.Kastner, Berichte der 12.Internationalen Metallographie-Tagung, Leoben, Praktische Metallographie Sonderband 38 S113-120, 27.-29.Sept. 2006, “Charakterisierung der Graphitverteilung in Sphäroguss"

[7] M. Grabner, J. Kastner, A. Klein, H. Reschreiter and D. Salaberger, Proceedings Interpreted Iron Ages, 3.-5. Nov. 2006, Linz (2006), "Dendrochronologische Datierung von Holzgegenständen aus Hallstatt mit Hilfe von CT-Bildern"

[8] M.Reiter, G.Zauner, European Conference on Non-Destructive Testing, European Conference on Non-Destructive Testing, Berlin, 25.-29.Sept. 2006, Poster: "Denoising of Computed Tomography Images using Multiresolution Based Methods"

[9] J. Kastner und B. Harrer, Deutsch – Österreichisches Symposium Optosensorik in der Produktion, OTTI Eigenverlag (2006), "Anwendungsbeispiele der Industriellen Computertomografie in der zerstörungsfreien Werkstoffprüfung"

[10] R. Engelke, G. Ahrens, R. Ruhmann, S. Kopetz, J. Kastner, K. Wiesauer, D. Stifter, B. Loechel, A. Neyer, G. Gruetzner, Springer Berlin/Heidelberg (2006), "Possibilities of Inline Process Inspection of High Aspect Ratio LIGA Micro Structures, HARMST 2005, Seoul Korea, Microsystem Technology"

[11] Schamall D, Teschler-Nicola M, Kohler T, Müller R, Salaberger D, Patzak B, Kastner J & Tangl St, 16th European Meeting of the Paleopathology Association, Santorin, 28. Aug.-1 Sept. 2006, Poster: "Histomorphometric Analysis of Historical Vertebrae by using Micro-Computed Tomography"

[12] Hinterhofer C., Ferguson J.C., Apprich V., Haider H., Kastner J., Stanek C., 14th International Symposium on Lameness in Ruminants, Colonia (Uruguay), 8.-11. Nov. 2006, "A finite element model of the full bovine digit" 

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 17 Aug 2012 12:06:17 +0200
Publications 2005 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/108-publications-2005 http://www.industrielle-ct.at/cms2/index.php/en/research/publications/108-publications-2005

Publications 2005

[1] J. Kastner, E. Schlotthauer, D. Salaberger, M. Simon und C. Sauerwein, Jahrestagung der DGZfP, Rostock, 2.-4.Mai 2005, "Mikro-Computertomographie für die Charakterisierung und Vermessung von Mikrobauteilen"

[2] S. Griesser, G. Buchinger, T. Raab und D. Meissner, Jahrestagung der DGZfP, Rostock, 2.-4.Mai 2005, "Charakterisierung von Brennstoffzellen und Brenn-stoffzellensystemen mit Computertomographie" 

]]>
elena.sell@fh-wels.at (Elena Sell) Publications Fri, 17 Aug 2012 12:04:25 +0200